ZT 4806 Rear Panel Transition Board

¤U¸üPDF

ZT 4806

 

This 6U, single-slot rear panel transition board provides rear panel access to the I/O functions of a number of Performance Technologies’ single board computers (SBC) - specifically the ZT 5503. The ZT 4806 is designed to function in the rear panel slot of a CompactPCI® system that accepts 6U boards, such as the ZT 5087e 4U General Purpose Platform.

The ZT 4806 allows for efficient troubleshooting and servicing of a system without disruption of the host SBC. All cabling is managed via the transition board, thus enhancing the reliability and availability of the system while running diagnostics or conducting maintenance.

Highlights


Key Design Elements

Ethernet

The ZT 4806 transitions an SBC's Ethernet channels A and B for rear panel access. Both 10Mbit/s and 100Mbit/s Ethernet protocols are provided through each of two RJ-45 rear panel connectors.

Input/Output

Two serial port connectors, J2 and J4, provide an alternative means of accessing the host SBC's COM1 and COM2 serial ports, respectively. Additionally, the ZT 4806 provides access to the SBC's secondary EIDE channel and floppy controller through internal connectors. A PS/2-style keyboard connector can be used in lieu of the connector on the host processor board. The ZT 4806 also supports a PS/2-style mouse port.

The ZT 4806 features a reset push-button switch (RST) on the faceplate. When RST is pressed, a System Reset is issued to the host SBC to force the processor to restart program execution. Local debounce is not implemented.

Warranty

One year

Specifications

Power Req.

Min.

Typ.

Max.

Supply Voltage, Vcc

4.75V

5.00V

5.25V

Supply Current, Vcc=5.0V

0mA

-

200mA


　

Mechanical

Measures: 9.2" x 3.2" (233.35mm x 80mm)
Connector: IEC-1076-4-101 (J1-J5)
Width: 0.8" (1 slot-4HP)
Weight: 6.45 oz (182 grams)

Environmental

Operating temperature: 0° to +65° C
Storage temperature: -40° to +85° C
Relative humidity: < 95% at 40° C, non- condensing

Peripherals and I/O interfaces

The ZT 4806 transitions I/O signals from the host SBC for rear panel use via the J3, 95-pin, 2 mm x 2 mm, female connector.

　

I/O Interface

Compatibility

COM1 Serial Port

9-pin, MDSM

COM2 Serial Port

9-pin, MDSM

PS/2 Keyboard Connector

6-pin, DIN, PS/2

PS/2 Mouse Port Connector

6-pin, DIN, PS/2

Ethernet Connector A

8-pin, RJ-45

Ethernet Connector B

8-pin, RJ-45

(Non-HA systems only)

 

Internal I/O Interface

 

IDE Interface

40-pin

Secondary IDE InterfaceFloppy Drive Connector

34-pin

Regulatory Compliance

CE Certification
The ZT 4806 meets intent of Directive 89/336/EEC for Electromagnetic Compatibility & Low-Voltage Directive 73/23/EEC for Product Safety. Compliance was demonstrated to the following specifications as listed in the Official Journal of the European Communities:

Safety
UL/cUL 60950 Safety for Information Technology Equipment
EN/IEC 60950 Safety for Information Technology Equipment
CB Report Scheme CB certificate and Report

Emissions Test Regulations
FCC Part 15, Subpart B
EN 55022
CISPR 22
Bellcore GR-1089

EN 50081-1 Emissions
GR-1089-CORE Sections 2 and 3
EN 55022 Class A Radiated
EN 55022 Power Line Conducted Emissions
EN 61000-3-2 Power Line Harmonic Emissions
EN 61000-3-3 Power line Fluctuation and Flicker

EN 55024 Immunity
GR-1089-CORE Sections 2 and 3
EN 61000 4-2 Electro-static Discharge (ESD)
EN 61000 4-3 Radiated Susceptibility
EN 61000 4-4 Electrical Fast Transient Burst
EN 61000 4-5 Power Line Surge
EN 61000 4-6 Frequency Magnetic Fields
EN 61000 4-11 Voltage dips, Variations & Short Interruptions

Ordering Information

A single version of the ZT 4806 is available ( ZT 4806A)