Technical
Specifications
Supported in LV-SDS |
yes |
Chip
type |
monochrome |
Chip
size |
1/2" |
Interface |
Analog |
Video
type |
Monochrome |
Video
norm |
RS170,Non-standard |
Pixel
format |
Analog |
Resolution |
752¡Ñ482 |
Full
frame shutter |
yes |
Scanning mode |
Interlaced,Progressive |
Taps |
1 |
Speed
(nominal) |
30 |
Speed
(max) |
360 |
Shutter speed |
1/32
?1/31750 |
Programmable shutter |
yes - via
LV-SDS |
Asynchronous reset |
yes,
supported in LV-SDS |
External sync |
H/V |
Partial scan |
lines |
RS232
control |
no |
Presentation |
compact |
Lens
mount |
C-mount |
Dimensions |
50¡Ñ80¡Ñ40 mm |
Weight |
240 g |
Power
consumption |
3.00 W |
S/N
ratio |
50 dB |
Operating temperature |
-10 ¡V
50 ¢XC |
Operating humidity |
80 % |
Special features |
Double
speed (120 Hz) |
Complementary
and Related
Products
Ordering
number |
Grabber |
Description |
10410 |
PicPort-Color for
LVmPC |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for LVmPC system. |
10420 |
PicPort-Mono-25S for
LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, single digitizing
channel. Version for LVmPC system. |
10430 |
PicPort-Stereo-25S
for LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for single-channel cameras. Version for LVmPC system. |
11000 |
PicPort-Color |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for standard PCI bus. |
11002 |
PicPort-Color CPCI |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for CompactPCI bus. |
11004 |
PicPort-Color PMC |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for PMC form factor. |
11010 |
PicPort-Mono |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Three (on request 4)
BNC connectors, single digitizing channel. Version for standard PCI bus. |
11011 |
PicPort-Mono-H4 |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, single digitizing channel. Version for standard PCI bus. |
11012 |
PicPort-Mono-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four BNC connectors,
single digitizing channel. Version for CompactPCI bus. |
11013 |
PicPort-Mono-H4-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, single digitizing channel. Version for CompactPCI bus. |
11015 |
PicPort-Mono-25S-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, single digitizing
channel. Version for PMC form factor. |
11020 |
PicPort-Stereo |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Three (on request 4)
BNC connectors, two digitizing channels. Version for standard PCI bus. |
11021 |
PicPort-Stereo-H4S |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for standard PCI bus. |
11023 |
PicPort-Stereo-H8 |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Eight Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for standard PCI bus. |
11024 |
PicPort-Stereo-H4S-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for CompactPCI bus. |
11027 |
PicPort-Stereo-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four BNC connectors,
two digitizing channels. Version for CompactPCI bus. |
11028 |
PicPort-Stereo-H8-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Eight Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for CompactPCI bus. |
11029 |
PicPort-Stereo-25S-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for single-channel cameras. Version for PMC form factor. |
21000 |
PicProdigy-Color-S |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Up to 16 composite or 8 S-video
inputs, four digitizing channels. Version for standard PCI bus. |
21001 |
PicProdigy-Color-300-S |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Up to 16 composite or 8 S-video
inputs, four digitizing channels. Additional FPGA for on-board algorithm
acceleration. Version for standard PCI bus. |
21005 |
PicProdigy-Color-Lite |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Up to 16 composite or 8 S-video
inputs, four digitizing channels. Stripped down version of PicProdigy-Color-S.
Version for standard PCI bus. |
¡@
Ordering
number |
Cable |
Used with |
Description |
14832 |
Cab/3m/PPM-25x/4xBNC |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono-25x or Stereo-25x (PMC-Module or PentiCam), Dsub25 male <->
4xBNC-connector, to connect up to 4 standard cameras, excluding power
supply through PicPort resp. PentiCam, an external power supply is
needed |
14812 |
Cab/3m/PPM-25x/H12F |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono/Stereo-25x, PMC-module or PentiCam, Dsub25/male <-> 12pin
HIROSE-connector, for cameras with HIROSE-connectors and SONY-compatible
pinout, including power supply through PicPort or PentiCam |
14842 |
Cab/3m/PPM-25x/2xH12F |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono/Stereo-25x, PMC-module or PentiCam,HDsub25 male <-> 2 pcs.
12pin HIROSE-connector, for 2 cameras with HIROSE-connectors and
SONY-compatible pinout, including power supply through PicPort or
PentiCam |
14391 |
Cab/2m/PPC/4xBNC |
PicPort-Color |
Camera cable for
PicPort-Color, HDsub44/male <-> 4 x BNC-connector to operate up to 4
cameras with CVBS signal |
14392 |
Cab/3m/PPC/4xBNC |
PicPort-Color |
Camera cable for
PicPort-Color, HDsub44/male <-> 4 x BNC-connector to operate up to 4
cameras with CVBS signal |
14542 |
Cab/3m/PPC/4xCVBS&Trigger
I/O |
PicPort-Color |
Camera cable for
PicPort-Color, HDsub44/male <-> 6 x BNC-connector to operate up to 4
cameras with CVBS signal as well as an opto-isolated trigger in- and
output |
15100 |
Adapt/PPC/4xBNC&1xS-Video |
PicPort-Color |
to connect 4 CVBS
video sources by BNC connectors to PicPort-Color-PMC or 1 S-video by
MiniDIN 4-pin connector and 3 CVBS video sources by BNC connectors to
PicPort-Color-PMC |
14702 |
Cab/3m/PZC&M&S/D25/4xBNC |
PicPort-Color PMC |
Camera cable for
PicPort-Color-PMC or PicPort-Mono/Stereo-25x, Dsub25/male <-> 4 x
BNC-connector to operate up to 4 cameras with CVBS signal |
22012 |
Cab/3m/PGC/4xCVBS |
PicProdigy-Color-S |
Camera cable for
PicProdigy-Color, HDsub26/male <-> 4 x BNC-connectors to operate up to 4
cameras with CVBS signal |
22022 |
Cab/3m/PGC/8xCVBS |
PicProdigy-Color-S |
Camera cable for
PicProdigy-Color, HDsub26/male <-> 8 x BNC-connectors to operate up to 8
cameras with CVBS signal |
14300 |
Cab/1m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
14302 |
Cab/3m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
14305 |
Cab/10m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
14310 |
Cab/1m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14311 |
Cab/2m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14312 |
Cab/3m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14313 |
Cab/4m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14314 |
Cab/5m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14315 |
Cab/10m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14316 |
Cab/15m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14317 |
Cab/20m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14318 |
Cab/25m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
|