|
Technical
Specifications
|
Supported in LV-SDS |
yes |
| Chip
type |
monochrome |
| Chip
size |
1/2" |
|
Interface |
Analog |
| Video
type |
Monochrome |
| Video
norm |
RS170,Non-standard |
| Pixel
format |
Analog |
|
Resolution |
750¡Ñ482 |
| Full
frame shutter |
no |
|
Scanning mode |
Interlaced |
| Taps |
1 |
| Speed
(nominal) |
30 |
| Speed
(max) |
30 |
|
Shutter speed |
1/64
?1/64000 |
|
Programmable shutter |
yes - via
LV-SDS |
|
Asynchronous reset |
yes,
supported in LV-SDS |
|
External sync |
H/V |
|
Partial scan |
n/a |
| RS232
control |
yes |
| Cell
size |
8¡Ñ9 µm |
|
Presentation |
compact |
| Lens
mount |
C-mount |
|
Dimensions |
44¡Ñ66¡Ñ29 mm |
| Weight |
150 g |
| Power
consumption |
1.00 W |
| S/N
ratio |
60 dB |
|
Operating temperature |
-5 ¡V
45 ¢XC |
|
Operating humidity |
80 % |
Complementary
and Related
Products
| Ordering
number |
Grabber |
Description |
| 10410 |
PicPort-Color for
LVmPC |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for LVmPC system. |
| 10420 |
PicPort-Mono-25S for
LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, single digitizing
channel. Version for LVmPC system. |
| 10430 |
PicPort-Stereo-25S
for LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for single-channel cameras. Version for LVmPC system. |
| 11000 |
PicPort-Color |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for standard PCI bus. |
| 11002 |
PicPort-Color CPCI |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for CompactPCI bus. |
| 11004 |
PicPort-Color PMC |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Composite or S-video inputs,
studio quality digitization. Version for PMC form factor. |
| 11010 |
PicPort-Mono |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Three (on request 4)
BNC connectors, single digitizing channel. Version for standard PCI bus. |
| 11011 |
PicPort-Mono-H4 |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, single digitizing channel. Version for standard PCI bus. |
| 11012 |
PicPort-Mono-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four BNC connectors,
single digitizing channel. Version for CompactPCI bus. |
| 11013 |
PicPort-Mono-H4-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, single digitizing channel. Version for CompactPCI bus. |
| 11015 |
PicPort-Mono-25S-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, single digitizing
channel. Version for PMC form factor. |
| 11020 |
PicPort-Stereo |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Three (on request 4)
BNC connectors, two digitizing channels. Version for standard PCI bus. |
| 11021 |
PicPort-Stereo-H4S |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for standard PCI bus. |
| 11023 |
PicPort-Stereo-H8 |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Eight Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for standard PCI bus. |
| 11024 |
PicPort-Stereo-H4S-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for CompactPCI bus. |
| 11027 |
PicPort-Stereo-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four BNC connectors,
two digitizing channels. Version for CompactPCI bus. |
| 11028 |
PicPort-Stereo-H8-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Eight Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for CompactPCI bus. |
| 11029 |
PicPort-Stereo-25S-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for single-channel cameras. Version for PMC form factor. |
| 21000 |
PicProdigy-Color-S |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Up to 16 composite or 8 S-video
inputs, four digitizing channels. Version for standard PCI bus. |
| 21001 |
PicProdigy-Color-300-S |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Up to 16 composite or 8 S-video
inputs, four digitizing channels. Additional FPGA for on-board algorithm
acceleration. Version for standard PCI bus. |
| 21005 |
PicProdigy-Color-Lite |
Analog frame grabber
for standard color (PAL/NTSC) cameras. Up to 16 composite or 8 S-video
inputs, four digitizing channels. Stripped down version of PicProdigy-Color-S.
Version for standard PCI bus. |
¡@
| Ordering
number |
Cable |
Used with |
Description |
| 14622 |
Cab/3m/PPM-Hxy/NEC/CIS/etc. |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-H4S or PicPort-Stereo-H8, HIROSE 12pin
male <-> HIROSE 12pin female, dedicated for NEC TI324A, CIS VCC870,
Pulnix STC-1100 or Ikegami SKC-131, including power supply through
PicPort |
| 14932 |
Cab/3m/PPMS-25S/H12F/TRIG-11 |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono/Stereo-25S, PMC-module or PentiCam/LVmPC, HDsub25 male <->
1 x 12pin HIROSE-connector (Trig. = pin 11), for TI324A, VCC870,
STC1100, SKC131, A11, A50, including power supply through PicPort |
| 14352 |
Cab/3m/H12M/H12F/pin#10-12 nc. |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1 except pins 10, 11 12 are
open, including power supply through PicPort, no external power supply
is needed |
| 14832 |
Cab/3m/PPM-25x/4xBNC |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono-25x or Stereo-25x (PMC-Module or PentiCam), Dsub25 male <->
4xBNC-connector, to connect up to 4 standard cameras, excluding power
supply through PicPort resp. PentiCam, an external power supply is
needed |
| 14391 |
Cab/2m/PPC/4xBNC |
PicPort-Color |
Camera cable for
PicPort-Color, HDsub44/male <-> 4 x BNC-connector to operate up to 4
cameras with CVBS signal |
| 14392 |
Cab/3m/PPC/4xBNC |
PicPort-Color |
Camera cable for
PicPort-Color, HDsub44/male <-> 4 x BNC-connector to operate up to 4
cameras with CVBS signal |
| 14542 |
Cab/3m/PPC/4xCVBS&Trigger
I/O |
PicPort-Color |
Camera cable for
PicPort-Color, HDsub44/male <-> 6 x BNC-connector to operate up to 4
cameras with CVBS signal as well as an opto-isolated trigger in- and
output |
| 15100 |
Adapt/PPC/4xBNC&1xS-Video |
PicPort-Color |
to connect 4 CVBS
video sources by BNC connectors to PicPort-Color-PMC or 1 S-video by
MiniDIN 4-pin connector and 3 CVBS video sources by BNC connectors to
PicPort-Color-PMC |
| 14702 |
Cab/3m/PZC&M&S/D25/4xBNC |
PicPort-Color PMC |
Camera cable for
PicPort-Color-PMC or PicPort-Mono/Stereo-25x, Dsub25/male <-> 4 x
BNC-connector to operate up to 4 cameras with CVBS signal |
| 22012 |
Cab/3m/PGC/4xCVBS |
PicProdigy-Color-S |
Camera cable for
PicProdigy-Color, HDsub26/male <-> 4 x BNC-connectors to operate up to 4
cameras with CVBS signal |
| 22022 |
Cab/3m/PGC/8xCVBS |
PicProdigy-Color-S |
Camera cable for
PicProdigy-Color, HDsub26/male <-> 8 x BNC-connectors to operate up to 8
cameras with CVBS signal |
| 14300 |
Cab/1m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
| 14302 |
Cab/3m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
| 14305 |
Cab/10m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
|
