more pictures...
¡@
Technical
Specifications
Supported in LV-SDS |
yes |
Chip
type |
monochrome |
Chip
size |
2/3" |
Interface |
Analog |
Video
type |
Monochrome |
Video
norm |
Non-standard |
Pixel
format |
Analog |
Resolution |
1300¡Ñ1026 |
Full
frame shutter |
yes |
Scanning mode |
Progressive |
Taps |
1 |
Speed
(nominal) |
12 |
Speed
(max) |
24 |
Shutter speed |
1/10000
?1/12 |
Programmable shutter |
no |
Asynchronous reset |
yes,
supported in LV-SDS |
External sync |
H/V |
Partial scan |
n/a |
RS232
control |
yes |
Cell
size |
6¡Ñ6 µm |
Presentation |
compact |
Lens
mount |
C-mount |
Dimensions |
50¡Ñ80¡Ñ40 mm |
Weight |
250 g |
Min
illumination |
1 lx |
S/N
ratio |
52 dB |
Operating temperature |
-5 ¡V
45 ¢XC |
Operating humidity |
80 % |
Special features |
Double
speed readout |
Complementary
and Related
Products
Ordering
number |
Grabber |
Description |
10420 |
PicPort-Mono-25S for
LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, single digitizing
channel. Version for LVmPC system. |
10430 |
PicPort-Stereo-25S
for LVmPC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for single-channel cameras. Version for LVmPC system. |
11010 |
PicPort-Mono |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Three (on request 4)
BNC connectors, single digitizing channel. Version for standard PCI bus. |
11011 |
PicPort-Mono-H4 |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, single digitizing channel. Version for standard PCI bus. |
11012 |
PicPort-Mono-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four BNC connectors,
single digitizing channel. Version for CompactPCI bus. |
11013 |
PicPort-Mono-H4-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, single digitizing channel. Version for CompactPCI bus. |
11015 |
PicPort-Mono-25S-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, single digitizing
channel. Version for PMC form factor. |
11020 |
PicPort-Stereo |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Three (on request 4)
BNC connectors, two digitizing channels. Version for standard PCI bus. |
11021 |
PicPort-Stereo-H4S |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for standard PCI bus. |
11023 |
PicPort-Stereo-H8 |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Eight Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for standard PCI bus. |
11024 |
PicPort-Stereo-H4S-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for CompactPCI bus. |
11027 |
PicPort-Stereo-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Four BNC connectors,
two digitizing channels. Version for CompactPCI bus. |
11028 |
PicPort-Stereo-H8-CPCI |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset. Eight Hirose-12
connectors, two digitizing channels for single-channel cameras. Version
for CompactPCI bus. |
11029 |
PicPort-Stereo-25S-PMC |
Analog frame grabber
for standard (EIA/CCIR) and non-standard monochrome cameras.
Slave/master sync, pixel sync, asynchronous reset, two digitizing
channels for single-channel cameras. Version for PMC form factor. |
¡@
Ordering
number |
Cable |
Used with |
Description |
14832 |
Cab/3m/PPM-25x/4xBNC |
PicPort-Mono-25S-PMC,
PicPort-Stereo-25S-PMC, PicPort-Stereo-25D-PMC |
Camera cable for
PicPort-Mono-25x or Stereo-25x (PMC-Module or PentiCam), Dsub25 male <->
4xBNC-connector, to connect up to 4 standard cameras, excluding power
supply through PicPort resp. PentiCam, an external power supply is
needed |
14300 |
Cab/1m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
14302 |
Cab/3m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
14305 |
Cab/10m/PPM/BNC<->BNC/75 Ohm |
PicPort-Mono,
PicPort-Mono-H4, PicPort-Stereo, PicPort-Stereo-H4S, PicPort-Stereo-H4D,
PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono/Stereo, BNC <-> BNC |
14310 |
Cab/1m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14311 |
Cab/2m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14312 |
Cab/3m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14313 |
Cab/4m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14314 |
Cab/5m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14315 |
Cab/10m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14316 |
Cab/15m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14317 |
Cab/20m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
14318 |
Cab/25m/PPM-Hx/H12M<->H12F/1:1 |
PicPort-Mono-H4,
PicPort-Stereo-H4S, PicPort-Stereo-H4D, PicPort-Stereo-H8 |
Camera cable for
PicPort-Mono-H4 or PicPort-Stereo-Hxy, HIROSE 12pin male <-> HIROSE
12pin female, all 12 wires are connected 1:1, including power supply
through PicPort, no external power supply is needed |
|